Latest Products http://www.zedvalves.com Latest Products Wed, 10 Apr 2019 16:27:21 +0530 en-us http://www.zedvalves.com Check Valves http://www.zedvalves.com/check-valves.htm http://www.zedvalves.com/check-valves.htm Wed, 10 Apr 2019 00:00:00 +0530 We fabricate a wide range of Check Valves which includes swing check valves, ball check valves and many more valves. These valves manufactured by us are made from the best of the metals. The designs of these valves are completely unique in comparison to other available in the market which directly increases its efficiency. These valves even work properly under tough and unyielding condition. These things make our products stand a way ahead of others available. We have a special quality analysis department which checks the quality. This has made us the most prominent wafer check valves manufacturer and suppliers in India. Swing Check Valves are having Bolted cover, Swing type disc. These valves are used to prevent flow reversal in piping systems. They are suitable for service in horizontal (flow up through valve only) piping runs. Swing Check Valves have low pressure drop and are best suited for moderate velocity applications. Correct sizing of swing check valves is important. Either too low a line velocity or too high a velocity can damage valve internals and shorten valve life. Swing Check Valves are suitable for all service media. Valves can also be supplied with counter weights and dash pot arrangement depending upon the condition and request. Standards Applicable : Design Standard : BS 1868/API-6DTesting Standard : API 598/BS EN 12266 -1Face to Face : ASME B 16.10End Connection :Flanged End : ASME B 16.5Butt Weld End : ASME B 16.25Pressure Temperature : ASME B 16.34 Material Structure : End Connection Flanged end raised face, Butt weld end, RTJ, etc. Shell : WCB, WC1, WC6, WC9, LCB, LCC, LC3, C5, C12, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastalloy, Inconel, Duplex Stainless Steel Trim : 13% Cr. Steel, 304, 304L, 316, 316L, 321, 347, Monel, Duplex Stainless Steel Gate Valves http://www.zedvalves.com/gate-valves.htm http://www.zedvalves.com/gate-valves.htm Wed, 10 Apr 2019 00:00:00 +0530 We manufacture a wide range of Gate Valves which include knife gate valves, cast iron gate valves and flangled gate valves. These valves are renowned all over for their premium quality. With the quality assurance we are the largest flanged gate valves supplier in India. We also manufacture these gate valves according to customer specifications. The quality of these valves is intact. They are properly inspected and verified before sending them to client. Uses of acme quality metal and flawless designs which enhance the performance of these valves have made us stand much ahead from the other manufacturers in India. Gate Valves are Outside Screw & Yoke, Bolted bonnet & with Rising stem. The STRAIGHT THROUGH BORE design assures minimum turbulence, erosion and resistance to flow caused by pockets & recesses. Gate Valves are mainly used where minimum pressure drop is a requirement. However, they can not be used for THROTTLING SERVICE because half open Gate Valves can damage the Seat Rings. Gate Valves are always used either in full open or full closed position. Design Features : Designed for exceptionally low pressure drop Back seating arrangement permits the replacement of packing with valve under fully open condition. Two piece design of gland flange provides centralizing effect to the gland sleeve, thus producing a uniform clamping pressure on the packings. Material Structure : End Connection : Flanged end raised face, Butt weld end, RTJ, etc. Operation : Hand wheel, Gear operator, Electrical Actuator, Pneumatic, Hydraulic Shell :WCB, WC1, WC6, WC9, LCB, LCC, LC3, C5, C12, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastalloy, Inconel, Duplex Stainless Steel Trim :13% Cr. Steel, 304, 304L, 316, 316L, 321, 347, Monel, Duplex Stainless Steel Standards "   Design Standard : API 600 Testing Standard : API 598 Face to Face : ASME B 16.10 End Connection : Flanged End : ASME B 16.5 Butt Weld End : ASME B 16.25   Pressure Temperature : ASME B 16.34 Valve Operation : Operator : Hand Wheel :   Size Range : 2-10 Class 150, 300, 600 2-4 Class 900 & 1500 Operator : Gear Operator Size Range : 12 & above Class 150, 300, 600 6 & above Class 900, 1500 Globe Valves http://www.zedvalves.com/globe-valves.htm http://www.zedvalves.com/globe-valves.htm Wed, 10 Apr 2019 00:00:00 +0530 We synthesize a wide range of Globe Valves which includes seal globe valves, gate globe valves and cast iron globe valves. These globe valves are made from the finest quality of metal and raw materials. We hold a state of the art infrastructure, where we have all the latest machineries and tools. All are team is specially trained. We have set our own quality control team. The designs are unique and efficient. Its been more than a decade that we are consistently serving our clients. With all this we are the paramount cast iron globe valves manufacturer and supplier from India. ZED Globe Valves are O.S. & Y Type i.e. Outside screw & yoke, Bolted bonnet, & Rising stem. Globe valves are used where throttling and both throttling and shut-off is required. They can also be used for on-off service, but because of high pressure drop, this is generally confined to applications where the valve is normally closed and drop is not important when the valve is open. Normally globe valves are installed with flow under the disc, but under certain conditions flow over the disc may have the advantages. ZED can also supply Angle Valves, Type Globe Valves and Globe Valves as S.D.NR (screw-down non-return) which in effect converts it into two valves, stop valve when closed or a check valve when open. Design Features : Streamlined shaped body for smooth flow of the working fluid for minimum pressure Drop. Back seating arrangement permits the replacement of packings while the valve is in full open position Standards Applicable : Design Standard : BS 1873 Testing Standard : API 598 / BS EN 12266 -1 Face to Face : ASME B 16.10 End Connection : Flanged End : ASME B 16.5 Butt Weld End : ASME B 16.25   Pressure Temperature : ASME B 16.34 Valve Operation : Operator : Hand wheel   Size Range : 2" - 10" Class 150, 300 2" - 6" Class 600 2" - 4" Class 900, 1500 Operator : Gear Operator Size Range : 12" & above Class 150, 300 8" & above Class 600 6" & above Class 900 & 1500 Material Structure : End Connection : Flanged end raised face, Butt weld end, RTJ, etc. Operation : Hand wheel, Gear operator, Electrical Actuator, Pneumatic, Hydraulic Shell : WCB, WC1, WC6, WC9, LCB, LCC, LC3, C5, C12, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastalloy, Inconel, Duplex Stainless Steel. Trim : 13% Cr. Steel, 304, 304L, 316, 316L, 321, 347, Monel, Duplex Stainless steel. Strainers http://www.zedvalves.com/strainers.htm http://www.zedvalves.com/strainers.htm Wed, 10 Apr 2019 00:00:00 +0530 Using the apex quality of raw material, we manufacture the finest quality of Strainers. Y-type strainers manufactured by us are renowned all over for their designs. The industrial strainers come with an assurance of being in proper working status even in intense conditions. The main reason for that is our unsurpassed quality. We manufacture these products by newly imported machinery. We hold a wide customer base all over. By providing the best quality we are the most reliable brass strainers suppliers from India. With the pledge towards serving our customers with the best quality of products we are surging ahead towards becoming the largest manufacturer in India. ZED "Y" type & Basket type strainers (Bolted Cover) have low pressure as higher flow area is provided through screen. ZED "Y" Type Strainers remove the foreign particles from the flowing liquids, Air, Steam, and Gases by means of perforated or wire mesh straining element. The strainer improves the clearance in the medium, and prolongs the life of valves, protect expensive pumps, instruments and other equipments. ZED "Y" Type Strainers can be installed either in horizontal or vertical position. However, in both the cases, the screening element should be kept the down side of the strainer body so that the suspended particles can be properly collected. These strainers are available with drain plug which can be replaced with Ball Valve for frequent blow off. ZED Strainers are available in wide variety of body material, pressure ranges and screen sizes for various suitable applications. Design Features : Design for more than 2.5 times Pipe Bore free Straining Area ensures a low Pressure Drop at even 50% clogged conditions allowing for a lesser down time for cleaning elements. For a higher efficiency specially designed Strainers are provided with a higher free straining area. Caged straining elements prevent crumbling of elements at even high flow velocities. Drain plugs provided in non corrosive material at the lowest points on the cover enables draining efficiency. Material Structure : End Connection Flanged end raised face, Butt weld end, RTJ, etc. Shell : WCB, WC1, WC6, WC9, LCB, LCC, LC3, C5, C12, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastalloy, Inconel, Duplex Stainless Steel (in Cast & Fabricated construction)SCREEN(MESH) 304, 304L, 316, 316L, 321 etc. Standards Applicable : Design Standard : Manufacturer standard Testing Standard : API 598/ EN 12266 -1 Face to Face : ASME B 16.10 End Connection : Flanged End : ASME B 16.5 Butt Weld End : ASME B 16.25 Pressure Temperature :ASME B 16.34